DKR Drive Controllers
Safety instructions for electric servo drives and controls
2-1
DOK-DIAX03-DKR********-PR02-EN-P
2
Safety instructions for electric servo drives and
controls
2.1 Introduction
Read these instructions before the equipment is used and eliminate the
risk of personal injury or property damage. Follow these safety
instructions at all times.
Do not attempt to install, use or service this equipment without first
reading all documentation provided with the product. Read and
understand these safety instructions and all user documentation of the
equipment prior to working with the equipment at any time. If you do not
have the user documentation for your equipment contact your local
Rexroth Indramat representative to send this documentation immediately
to the person or persons responsible for the safe operation of this
equipment.
If the product is resold, rented or transferred or passed on to others, then
these safety instructions must be delivered with the product.
WARNING
Inappropriate use of this equipment, failure to
follow the safety instructions in this document
or tampering with the product, including
disabling of safety devices, may result in
product damage, personal injury, severe
electrical
shock or death!
2.2 Explanations
The safety warnings in this documentation describe individual degrees of
hazard seriousness in compliance with ANSI:
Warning symbol with signal
word
Degree of hazard seriousness
The degree of hazard seriousness
describes the consequences resulting from
non-compliance with the safety guidelines.
DANGER
Bodily harm or product damage will occur.
WARNING
Death or severe bodily harm may occur.
CAUTION
Death or severe bodily harm may occur.
Fig. 2-1: Classes of danger with ANSI
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
