Manitowoc 2250 MAX-ER 2000, Руководство оператора

Страница: 13 / 196

Reference
Only
Manitowoc
Published 01-08-13, Control # 049-05
1-1
2250 MAX-ER 2000 OPERATOR’S MANUAL INTRODUCTION
1
SECTION 1
INTRODUCTION
CRANE DATA
See the end of this section for crane data specific to your
crane:
• Basic Specifications.
• EC Declaration (if applicable).
CRANE/ATTACHMENT IDENTIFICATION
An identification label is attached to the outside of the
operator’s cab (see Figure 1-1) and to the attachments (i.e.
luffing jib and MAX-ER) available for this crane.
The crane or attachment model, application, and serial
number are provided on the label.
For the exact location of the identification labels on your
crane and attachments, see the Nameplates and Decals
Drawing in Section 2 of this manual.
CRANE ORIENTATION
The terms RIGHT, LEFT, FRONT, REAR used in this manual
see operator’s right, left, front, and rear sides when seated in
the operator’s cab looking forward.
• The boom is on the front of the upperworks.
• The crawler drive shafts are at the rear of the crawlers
and carbody.
IDENTIFICATION OF MAX-ER
COMPONENTS
See Figure 1-2 for identification of the MAX-ER components.
Se e Se c t i on 1 i n t h e C r an e O p e r at o r ’s M a nu a l f o r
identification of the crane components.
FIGURE 1-1
Serial
Number
Model
Number
Current Production
Serial
Number
Model
Number
Application:
LIFT = Liftcrane
CLAM = Clamshell
DRAG = Dragline
Past Production