Manitou STACKY 10 FR D28, Руководство оператора

Страница: 15 / 60

1-11
STACKY operating and safety instructions 2012.12
G - STOPPING THE STACKER
SAFETY INSTRUCTIONS
- When the stacker is stationary, or if the operator has to the leave the operator’s
position (even for a moment), place the forks or tool in the down position .
INSTRUCTIONS
- Park the stacker on level ground,
- Place the fork or tool in the down position (fig . G1),
- Turn the key anti-clockwise (1) (fig . G2),
- Remove the key,
- Push the emergency stop button (2) (fig . G2) .
H - CHARGING THE BATTERY
SAFETY INSTRUCTIONS
The battery must be charged, serviced and replaced by experienced persons .
It is formally forbidden to smoke or use a flame nearby when performing these
operations .
Never place metal objects on the battery .
Bracelets, chains or watches must not be worn to avoid accidental shot circuits .
All the operations described above must be carried out with the machine shut down
(the multifunction display will be switched OFF in this case) .
INSTRUCTIONS
Charging must be carried out in a well-ventilated space . Check that there are no
flammable materials or machines generating sparks within a 2 m radius around
the machine during charging .
Fire protection equipment is to be made available nearby .
- Unplug the charging lead (1) (fig . H1) from the dummy socket on the fork side
and connect it to a 220 V - 50 Hz - 10 A single phase socket .
The charger is fitted with an indicator lamp (2) (fig . H1), the colour of which indicates
the different levels of battery charge (fig . H2) :
• the indicator lamp is red during the initial charging phase,
• the indicator lamp is yellow when the battery reaches 80 % charge,
• the indicator lamp is green when the battery is fully charged .
- Unplug the charging lead and reconnect it to the dummy socket, taking care
to return the lead to its housing .
CAUTION : When the mains lead is disconnected from the dummy socket
(1) (fig. H1), all of the stacker’s controls will be disabled. The operator must the-
refore reconnect the mains lead to the dummy socket in order to use the stacker.
If charging is carried out at night, check that the current is not switched off by the
general shut-down of the establishment .
Never discharge a battery beyond 80 %,
The dashboard indicator signals this level of charge by means of two alternately flashing red LEDs. The battery then
needs recharging.
G1
VOLTS
28
22
19
16
- +
1
2
G2
H2
1
2
H1