Manitou STACKY 10 FR D28, Руководство оператора

Страница: 57 / 60

4-5
2012.12 Tools - STACKY
INTRODUCTION
The tools shown in this instruction manual are standard tools . They are interchangeable and can be mounted on any standard
stacker .
A wide range of standard tools, specially designed and perfectly suitable for your stacker is available and guaranteed by
MANITOU .
The use of these standard tools is governed by the instructions contained herein .
Certain special applications require the use of non-standard tools that are specific to their stacker and are not interchangeable .
Only tools approved by MANITOU are to be used on our stackers. The manufacturer shall not be liable for any
modifications or adaptations made to its tools without its written approval.
CAUTION : the capacities (maximum load and centre of gravity) are specific to each tool.
It is forbidden to handle a load weighing more than the effective capacity indicated on the tool’s name plate.
Suspended loads MUST be handled with a stacker designed for that purpose (see : 1 - OPERATING AND SAFETY
INSTRUCTIONS : LOAD HANDLING INSTRUCTIONS : I - PICKING-UP AND SETTING-DOWN A SUSPENDED LOAD).