Manitou MH 20-4 T BUGGIE, Руководство оператора

Страница: 106 / 124

3-34
G6 - LIFT TRUCK
TOWING
MSI 20 T Série 2-E3 MSI 20 T BUGGIE Série 2-E3
MSI 25 T Série 2-E3 MSI 25 T BUGGIE Série 2-E3
MSI 30 T Série 2-E3 MSI 30 T BUGGIE Série 2-E3
MSI 35 T Série 2-E3 MSI 35 T BUGGIE Série 2-E3
If the lift truck is not on a horizontal ground, to fix so that it does not descend the slope.
The lift truck must be towed at very slow speed (less than 5 kph) over the shortest possible distance
(less than 100 m).
- To tow a lift truck, the wheel reducers 1 (fig. G6/1) must be unlocked to avoid deteriorating
the hydrostatic transmission. Towing the lift truck must be carried out by means of a rigid
drawbar, because the lift truck is uncoupled from its braking system after unlocking the
wheel reducers.
UNLOCKING THE FRONT WHEEL REDUCERS
Carr y out this operation on both front wheel reducers.
- Place a container under the reducer.
- Disassemble the retaining ring 1 (fig. G6/1).
- Remove the plug 2 (fig. G6/1), a little oil will then escape.
- Put a screw HM 6 x .. onto the threading of the drive shaft 3 (fig. G6/2).
- Remove the drive shaft and protect it with a clean cloth.
- Reassemble the plug 2 (fig. G6/1) and the retaining ring 1 (fig. G6/1) so as to protect the
wheel reducers during the towing.
TOWING THE LIFT TRUCK
- Untighten the hand brake.
- Turn up the warning lights (option).
- As the steering booster is lacking, operate slowly and energetically the steering wheel.
Avoid abrupt movements and jerks.
- After towing, proceed in the reverse order to lock the wheel reducers.
NOTE : When reassembling, ensure that the drive shaft grooves and the gears coincide without forcing.
- Top up the level of oil in the wheel reducers (see : 3 - MAINTENANCE : B3 - FRONT WHEELS REDUCERS OIL LEVEL).
G6/2
3
G6/1
1
2