Manitou MH 20-4 T BUGGIE, Руководство оператора

Страница: 88 / 124

3-16
B6 - HYDRAULIC OIL LEVEL
CHECK
Place the lift truck on level ground with the I.C. engine stopped, the mast tilted backwards
and lowered as far as possible.
- Refer to gauge 1 (fig. B6/1).
- The oil level is correct when it is at the level of the red point.
- If necessar y, add oil (see : 3 - MAINTENANCE : LUBRICANTS AND FUEL).
- Lift up the overhead guard or the cab (see : 2 - DESCRIPTION :
INSTRUMENTS AND CONTROLS).
- Remove cap 2 (fig. B6/2).
- Add oil by filler port 3 (fig. B6/2).
Use a clean funnel and clean the underside of the oil drum before filling.
- Put the cap back.
- Check visually that there is no leakage in the tank and pipes.
Always maintain the oil level at maximum as cooling depends on the oil flowing through
the tank.
B7 - WINDSCREEN WASHER LIQUID LEVEL
CHECK
- Lift up the overhead guard or the cab (see : 2 - DESCRIPTION :
INSTRUMENTS AND CONTROLS).
- Check visually the level.
- If necessar y add windscreen washer liquid (see : 3 - MAINTENANCE : LUBRICANTS AND
FUEL) by filler port 1 (fig. B7).
B8 - CAB DOOR (OPTION)
GREASE
- Clean and lubricate the points 1 (8 lubricators) (fig. B8) with grease (see : 3 - MAINTENANCE
: LUBRICANTS AND FUEL) and remove the surplus of grease.
B6/1
1
B6/2
3
2
B7
1
B8
1