Manitou MH 20-4 T BUGGIE, Руководство оператора

Страница: 64 / 124

2-40
12 - FORWARD/NEUTRAL/REVERSE GEAR SELECTION
When operating this control, the lift truck should be travelling at slow speed and not
accelerating. When the reverser is in the neutral position a mechanical lock prevents an
accidental shifting movement.
FORWARD: Lift slightly and push the lever for wards (position A).
REVERSE: Lift slightly and pull the lever backwards (position B).
NEUTRAL: To start the lift truck, the lever must be in neutral (position C).
NOTE: As an OPTION, reversing lights and an acoustic reversing alarm indicate that the lift
truck is running in reverse.
SAFETY FOR MOVING THE LIFT TRUCK
Authorisation to move the lift truck is controlled by an electronic unit. The operator must
obser ve the following sequence to move the truck for wards or backwards:
1 - sit down correctly in the driver’s seat,
2 - release the parking brake,
3 - engage for ward or reverse movement.
To stop the lift truck, he must obser ve the following sequence:
1 - Set the for ward/reverse selector to neutral,
2 - engage the parking brake,
3 - get out of the lift truck.
NOTE: If the operator leaves the driving cab with for ward or reverse engaged, a continuous alarm will sound. While this alarm
sounds, the operator can simply sit back in the seat and continue advancing or reversing.
If the alarm becomes discontinuous, the operator must sit back in the seat, put the for ward/reverse selector back in
neutral and select for ward or reverse if he wishes to continue moving.
13 - HYDRAULIC CONTROLS
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating
valve. In the event of suspected malfunction, contact your dealer. ANY ALTERATION MAY RENDER THE
WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the lift
truck.
LIFTING THE LOAD
- The lever A to the right when lifting.
- The lever A to the left when lowering.
NOTE: The engine r.p.m. automatically increases when lifting the load.
TILTING THE MAST
- The lever A backwards for backward tilting.
- The lever A for wards for for ward tilting.
ATTACHMENT
- Lever B for ward or backward.
ADDITIONAL ACCESSORY
- The lever C for wards or backwards.
14 - DOCUMENT CLIP
15 - DOCUMENT HOLDER NET
Make sure that the operator’s manual is in the right place, i.e. in the document holder net.
NOTE: An OPTION waterproof document-holder exists.
16 - WINDSCREEN WASHER TANK
See: 3 - MAINTENANCE: B - EVERY 50 HOURS SERVICE.
A
C
B
A
B
C