Manitou M 26-2 Turbo Serie 3-E3, Руководство оператора

Страница: 158 / 178

3-50
G3 - OVERHEAD GUARD OR CAB
LIFTING
To be carried out when performing servicing operations.
POSITIONING THE LIFT TRUCK
- Place the lift truck on level ground.
- Place the gear lever in 1st or 3rd gear (according
to model of lift truck).
- Untighten the hand brake.
- Tilt the mast to its maximum extent and, if necessary,
raise the mast until it is approximately 50 cm above the
overhead guard or the cab.
PLACING THE CABLE
- Unscrew the two screws 1 (fig. G3/1) on the roof and replace them with two MANITOU eyes 2
(fig. G3/2) Reference 72422.
- Pass the cable over the upper belt of the mobile upright and attach it to the eyes (fig. G3/3).
UNLOCKING THE OVERHEAD GUARD OR THE CAB
- Remove the side panels 3 (fig. G3/4) (3 fastening screws).
- Unscrew the silentblock screws 4 (fig. G3/5) and remove only the nuts.
- Close the left-hand cab door.
- Open and block the right-hand cab door.
G3/3
G3/1
1
1
G3/2
2
G3/4
3
3
G3/5
4
4
647003 EN (03/01/2012)