Manitou M 26-2 Turbo Serie 3-E3, Руководство оператора

Страница: 126 / 178

3-18
A6 - GEAR BOX OIL LEVEL
CHECK
MC 40 Turbo POWERSHIFT Série 3-E3 MC 60 Turbo POWERSHIFT Série 3-E3
MC 50 Turbo POWERSHIFT Série 3-E3 MC 70 Turbo POWERSHIFT Série 3-E3
Place the lift truck on level ground with the I.C. engine cold and idling.
- Remove the access panel 1 (fig. A6/1).
- Remove the dipstick 2 (fig. A6/2).
- Wipe the dipstick and check the correct level against the lower mark.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by the filler port 3 (fig.
A6/2).
NOTE: LEVEL WHEN COLD (between 15°C and 20°C), the oil must be level with the lower mark.
LEVEL WHEN HOT (between 82°C and 93°C), the oil must be level with the upper mark.
- Check visually that there is no leakage or seepage of oil in the transmission.
An excess of oil in the gearbox may adversely affect the operation of the lift truck.
A7 - TYRE PRESSURE AND WHEEL NUT TORQUE
CHECK
- Check the condition of the tyres, to detect cuts, protuberances, wear, etc.
- Check the torque load of the wheel nuts. Non compliance with this instruction can cause damage and rupture to the wheel bolts and
distortion to the wheels.
Wheel nut tightening torque
t'SPOUUZSFT/Nœ
t3FBSUZSFT/Nœ
MC 30 Turbo Série 3-E3
t3FBSUZSFT/Nœ
M 26-2 Turbo Série 3-E3 M 30-2 Turbo Série 3-E3
t3FBSUZSFT/Nœ
M 26-4 Turbo Série 3-E3 M 30-4 Turbo Série 3-E3
M 40-4 Turbo Série 3-E3 M 50-4 Turbo Série 3-E3
t3FBSUZSFT/Nœ MC 40 Turbo POWERSHIFT Série 3-E3 MC 50 Turbo POWERSHIFT Série 3-E3
t3FBSUZSFT/Nœ
MC 60 Turbo POWERSHIFT Série 3-E3 MC 70 Turbo POWERSHIFT Série 3-E3
- Check and adjust the tyre pressures if necessary (see: 2 - DESCRIPTION: CHARACTERISTICS).
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation. Respect the recommended tyre
pressures given.
A6/1
1
A6/2
2
3
647003 EN (03/01/2012)