M&V S.r.l.
Via L. Guerra, 9
80040 Cercola (NA)
Ph./Fax +39 0815552428
e-mail:
© M&V S.r.l.
vesuvius userguide10 June 2015.doc
Page 9 of 24
Information Technology Solutions
V
ESUVIUS OWNERS MANUAL
Understanding the display & programming
functions
The Vesuvius dot matrix display is capacitive
sensing and
only has to be touched to elicit a
response, no pressure is necessary.
The display
may appear not to respond, because some functions
have a programmed delay. In these cases the area
should simply be touched for the appropriate time
e.g. entering the advanced menu has a 10s delay, to
reprogram a profile has a 5s delay.
The display above shows the Vesuvius on standby.
Touching the area marked with a red circle,
switches the machine on and the "home screen"
is shown (below).
The display is split into 3 Horizontal zones. The top
zone shows brew pressure (when brew lever
activated), Steam boiler temperature and pressure.
The next Zone shows what pressure profile is being
used and this is a sideways scrolling display.
The third zone has a tank water level indicator,
which actually only shows full and empty
. The
time and day of the week and on the right the brew
boiler temperature next to a thermometer graphic.
Main Vesuvius Screens
Remember this triangle to move from one menu to
another, after a few tries it becomes easy to use.
Tip: It helps if you think about accessing the
"main menu" as, two touches in the right hand
lower corner of the screen
Brew
Pressure
Service (steam)
Boiler temperature
Service (steam)
Boiler pressure
Home Screen
Main menu
for
accessing most
commonly used
settings. Touch the "X"
icon to move to the
home screen
Profile menu
for
viewing and
changing profiles.
Touch the "House"
Icon to move to the
main menu
Note: Profile settings, as well as all other menu
settings are maintained even if the machine is
unplugged via a battery powered backup system
Home screen
, this
is the usual screen
you will see
.
Touch this
screen anywhere
to move to the
profile menu
