M&V S.r.l.
Via L. Guerra, 9
80040 Cercola (NA)
Ph./Fax +39 0815552428
e-mail:
© M&V S.r.l.
vesuvius userguide10 June 2015.doc
Page 21 of 24
Information Technology Solutions
V
ESUVIUS OWNERS MANUAL
Set the
temperature of the
brew boiler (also
accessible from
main menu). I
personally use
93C
How many minutes (max
999) after machine enters
economy mode, before it
switches to standby(if not
used).
0 to disable
Allows for the drop in
temperature of water as it
passes from the brew boiler
to the coffee. E.g. Brew
Boiler water at 107 c, but 94 c
is displayed
Revised
recommended PID
Values for Brew
Boiler. We do not
recommend you
change these
Temperature range around set
point where PID operates. We
want a larger range for the brew
boiler. Your machine may be set
to 7C, I recommend you change
this to 5C
This value is the number of seconds the machine will wait before
1. Closing the mains water solenoid, preventing flooding if a fault develops on
a plumbed machine
2. Showing the red fill tank screen, when the water level is low
3. The length of time the pump will run when auto-filling the steam boiler
If you often walk away from the machine and miss the red low water warning
on the display, you can reduce this value to 100 seconds.
Note: The programmers did make one
error when calculating F values that
were deltas.
e.g. In both "PID Setting" screens and
"Economy DT" They should have
deducted 32 from the F values and they
didn't, they just showed a change in
temp of 67C as 152F when in fact it
should be 120F
The one delta that is correct and
gives the mathematically correct F
value is the Offs.Tset Coffee
This is being corrected for USA
machines (and all future Europe
machines) . It has absolutely no effect
on the machines operation because all
values are calculated in C internally.
Also any displayed temperature values
for brew temperature and steam boiler
temperature are correct as these are not
deltas, but actual values
