M&V S.r.l.
Via L. Guerra, 9
80040 Cercola (NA)
Ph./Fax +39 0815552428
e-mail:
© M&V S.r.l.
vesuvius userguide10 June 2015.doc
Page 20 of 24
Information Technology Solutions
V
ESUVIUS OWNERS MANUAL
There is no
Buzzer
Pump PID settings
for controlling
pressure,
recommend using
these revised
values until
factory settings
are updated
Pump acceleration,
speed of response
to change. Values
above 700 have no
effect.
Changing
value may require
change to pump PID
settings
Service boiler
autofill probe..
affects fill level,
leave on Mid
. Low
allows higher
boiler water level,
High is less
Both boilers heat
at once or brew
boiler priority, if
enabled. Reduces
max power
consumption to
1500W approx
Does nothing
important
Set to display
temperatures
in C or F.
Note F temps
omit decimal
values and
always round
down
Service
(steam) boiler
temperature.
I
recommend a
setting of 127
or 128
(factory use
130)
PID settings
for steam
boiler
Temperature
range around
set point
where PID
operates. We
want only a
small range
for service
boiler
The delta
value for
economy.
E.g. this will
drop any
boiler
temperature
by 67C
How many
minutes before
machine
enters
economy
mode, if not
used.
0 to
disable. I also
recommend
using 4 or 5
minutes
