M&C SP 30-H EX2, Инструкция по эксплуатации

Страница: 8 / 16

8 SP30-H../EX2 | 1.02.00 www.mc-techgroup.com
Wear protective gloves!
Working with chemicals, sharpe objects or extremly high
temperatures requires wearing protective gloves.
Wear safety glasses!
Protect your eyes while working with chemicals or sharpe objects.
Wear safety glasses to avoid getting something in your eyes.
Wear protective clothes!
Working with chemicals, sharpe objects or extremly high
temperatures requires wearing protective clothes.
8 APPLICATION
The electrically heated sample tube SP30-H../EX2 is used wherever cooling down or falling below the
dew point, e.g. SP3200-H , is to be avoided during gas sampling from the sampling point to the heated
gas sampling probe.
In dust-laden processes which tend to fall below the dew point in the extraction area during operation or
when the system is at a standstill, it may be advisable to use the electrically heated sample tube
SP30-
H1.1-V/EX2 with heated in-situ pre-filter V20-2/30. This prevents premature clogging or destruction.
9 DESCRIPTION
9.1 HEATED SAMPLE TUBE SP30-H../EX2 AND SP30-H1.1-V/EX2
The heated sample tubes SP30-H../EX2 and SP30-H1.1-V/EX2 can be
installed in hazardous areas of zone 2.
The electrically heated
M&C sample tube SP30-H../EX2 is available in 0.6 m [
23.62”] and 1 m (39.37“]
length (L1 in Fig. 1 and 2). Other length on request.
With a mounting flange with 4 welded screws the heated sample tube
SP30-H../EX2 can be easily fixed
both to the flange at the sample point and the probe head e.g. SP3200-H .
The heated sample tubes SP30-H../EX2 are equipped with a G3/4"i thread connector at the tube end.
This enables fixing a standard non heated sample tube or pre-filter to the heated insitu tube.
The electrical cartridge heater is located inside a double tube system, completely separated from the
process. At the version
SP30-H1.1-V/EX2 the included large pre-filter V20-2/30 is heated up with the
sample tube.
The tube versions
SP30-H../EX2 have an internal diameter of 22 mm.