Mammuth SP50HEL, Инструкция по установке и эксплуатации

Страница: 12 / 25

1. General information
Before starting to use the machine you need to read and fully understand the manual!!!
This manual contains important information about the proper way of installing, operating and
maintaining of the equipment described in this manual. When using any shop press there are a
different kind of risks that you may incur, risks in personal injuries or property damage. Everyone
who comes into contact with the installation, maintenance or operation of the shop press must be
fully familiar with the contents of this manual. To protect yourself against personal injury or property
damage you need to follow the following information and instructions in this manual.
Every Mammuth shop press is manufactured in accordance with the Machinery Directive 2006/42/EC
and EN60204-1:2006 norm. Every lift is supplied with a manual including a declaration of conformity.
These must be stored and kept up to date properly.
Because of quality reasons constant improvements are going to be made on the equipment.
Valkenpower BV (holder “Mammuth”) reserves the right to alter specifications of the equipment
described in this manual.
Intended use
The described machine is designed for removal and installation of smaller parts which are fit or need
to be removed by means of a press, the press should not be used for any other purposes.
2. Safety regulations
1. Only authorized persons who are familiar with the entire contents of this manual and
which are aware of the risks that come with working with press with, may use the press.
2. Connect the shop press according to the requirements in this manual.
3. Replace the warning labels when removed or no longer readable.
4. The shop press is designed and intended for use by professional and experienced staff.
When you are not familiar with the use of a press, you should refrain from using it until
you have gained sufficient experience and knowledge.
5. Do not use this shop press for any purposes than it was intended for. When this does
occur, this will void your warranty.
6. Do not wear any jewelry, loose-fitting clothing and/or watch while using the press. Long
hair should be tied up, the sleeves should be rolled up to the elbow and wear gloves.
Wearing anti-slip footwear or putting non-slip strips on the floor is recommended.
7. Do not operate this machine when you are tired or under the influence of alcohol/
medicines/drugs.
8. Remove materials, tools, wrenches and the like from the shop press before using the
press.
9. Make sure the shop press is firmly fixed on a solid surface.
10. Make sure there is enough space around the workplace and for adequate lighting.
11. Keep the floor around the machine free of sharp materials, oil and grease.
12. Keep visitors at a safe distance from the work area and keep children away.
13. Focus your attention on your work. Looking around, making conversations etc. will
distract you, which could result in serious physical injuries.