Mammuth SP50HEL, Инструкция по установке и эксплуатации

Страница: 18 / 25

7. Now move the lever to the right to move the piston back up again and let it retract
completely.
8. Then remove the workpiece from the press.
6. Maintenance
PLEASE NOTE! The pressure relief valve is set in the factory, it is strictly forbidden to change these
settings. Check every six months if the pressure relief valve is set correctly by operating the press
and see if the maximum pressure is still set correctly (50T/75T). If this is not the case, use the press
or not to the pressure relief valve replaced/repaired, contact your sales point!
PLEASE NOTE! Before maintenance or repair work is carried out, it is necessary to disconnect the
press from the electrical power supply because of electrocution danger!
Regular maintenance
1. Regularly clean the workshop press with a slightly moist cloth
2. Check for any use or the oil level is at the right level yet, please fill out this if necessary with
Mammuth CH22 Press oil.
3. Check prior to each use if there are no leaks or worn out hydraulic lines, if this is the case,
take the press out of use until the defective part has been replaced.
4. Regularly clean all parts of the workshop press and check for damage, deformation etc.. If a
part needs to be replaced, please contact your Mammuth retailer and please specify the
model number of the press and the part number, please refer to the parts drawing and list.
Long time storage
If the press is not in use for an extended period, set it on a dry spot with the piston fully retracted.
Lubricate all moving parts and hinges with a light oil.
7. Specifications
Type SP50HEL SP75HEL
Capacity (Ton) 50 75
Stroke (mm) 300 350
Voltage (V/Hz) 400V/50Hz 3Ph 400V/50Hz 3Ph
Power (kW) 1,5 1,5
Working range (mm) 0 – 1018 0 – 945
Measurements (LxWxH in
mm) 988x365x2020 1140x365x1860
Weight (kg) 360 1200
Piston speed extracting 12-14cm/min of 2-2,33mm/sec 12-14cm/min of 2-2,33mm/sec
Piston speed retracting 21-23cm/ min of 3,5-3,83mm /sec 21-23cm/min of 3,5-3,83mm/sec