Mammoth J036HHC, Инструкции по установке, эксплуатации и обслуживанию

Страница: 13 / 13

12
TTTTrips rips rips rips and and and and Power Power Power Power Loss Loss Loss Loss
Manual Manual Manual Manual Mode Mode Mode Mode
Check that Shunt #2 is on “MAN” and attach Shunt #1 to one of
the following terminals to select power mode. (NOTE: The
following descriptions assume that the 120 second Initial
Power-up delay and the 5-35 second Random Start function (if
applicable) have occurred.)
RS
RS RS RS (Random (Random (Random (Random Start): Start): Start): Start):
The unit should start immediately upon
call following 2-second fan time delay, 4-second R.V. time delay
and 6-second compressor time delay. (If the unit has been off
for more than 5 minutes, the compressor will start on a call for
cooling after a 6-second time delay.) There is a minimum 5-
minute, 6-second time delay between cycles and a 2-minute, 6-
second time delay after reset/restart.
Safety Circuit/Condensate Trip - All must be reset. (L.P.
switch bypass of 120 seconds upon startup.)
Loss of Power - Upon resumption of power, the unit restarts
following 120-second initial power-up time delay, random
start function and 2-second fan time delay, 4-second R.V.
time delay and 6-second compressor time delay.
No
No No No RS: RS: RS: RS:
The unit should start immediately upon call following 2-
second fan time delay, 4-second R.V. time delay and 6-second
compressor time delay. (If the unit has been off for more than 5
minutes, the compressor will start on a call for cooling after a 6-
second time delay.) There is a minimum 5-minute, 6-second
time delay between cycles and a 2-minute, 6-second time delay
after reset/restart.
Safety Circuit/Condensate Trip - All must be reset. (L.P.
switch bypass of 120 seconds upon startup.)
Loss of Power - Upon resumption of power, the unit restarts
following 120-second initial power-up time delay and 2- second
fan time delay, 4-second R.V. time delay and 6- second
compressor time delay.
TTTTest:
est: est: est:
The unit should start immediately upon call following 2-
second fan time delay, 4-second R.V. time delay and 6-second
compressor time delay. Quick cycling may occur. Unit will
restart immediately after reset following 2-second fan time
delay, 4-second R.V. time delay and 6-second compressor time
delay.
Safety Circuit/Condensate Trip - All must be reset. (L.P.
switch bypass of 120 seconds upon startup.)
Loss of Power - Upon resumption of power, the unit restarts
following 2-second fan time delay, 4-second R.V. time delay
and 6-second compressor time delay.
Auto Auto Auto Auto Mode Mode Mode Mode
Check that Shunt #2 is on “AUTO” and attach Shunt #1 to one
of the following terminals to select power mode. (NOTE: the
following descriptions assume that the 120-second Initial Power-
up delay and the 5-35 second Random Start function (if
applicable) have occurred.)
RS
RS RS
RS (Random
(Random (Random
(Random Start):
Start): Start):
Start):
The unit should start immediately upon
call following 2-second fan time delay, 4-second R.V. time delay
and 6-second compressor time delay. (If the unit has been off for
more than 5 minutes, the compressor will start on a call for
cooling after a 6-second time delay.) There is a minimum 5-
minute, 6-second time delay between cycles.
Safety
Circuit/Condensate Trip - Automatic reset. Compressor
restarts approximately 20 minutes after the lockout condition
occurs.
Loss
of Power - Upon resumption of power, the unit restarts
following 120-second initial power-up time delay, random
start function and 2-second fan time delay, 4-second R.V.
time delay and 6-second compressor time delay.
No No No No RS: RS: RS: RS:
The unit should start immediately upon call following-2
second fan time delay, 4-second R.V. time delay and 6-second
compressor time delay. (If the unit has been off for more than 5
minutes, the compressor will start on a call for cooling after a 6-
second time delay.) There is a minimum 5-minute, 6-second
time delay between cycles.
Safety Circuit/Condensate Trip - Automatic reset.
Compressor restarts approximately 20 minutes after the
lockout condition occurs.
Loss of Power - Upon resumption of power, the unit restarts
following 120-second initial power-up time delay and 2- second
fan time delay, 4-second R.V. time delay and 6- second
compressor time delay.
TTTTest: est: est: est:
The unit should start immediately upon call following 2-
second fan time delay, 4-second R.V. time delay and 6-second
compressor time delay. Quick cycling may occur.
Safety Circuit/Condensate Trip - Automatic reset.
Compressor restarts approximately 20 minutes after the
lockout condition occurs.
Loss of Power - Upon resumption of power, the unit restarts
following 2-second fan time delay, 4-second R.V. time delay
and 6-second compressor time delay.