HydroBank MS Installation and Operation Manual MAMM-WSHP-IOM-1MSA (October 2014)
19
Thermostat Wiring
Thermostat Wiring
The HP-5 microprocessor control is designed to operate
with wall thermostats sold by Mammoth. It can be used
with other heat pump thermostats but some features
may not be available. Wiring from the thermostat is rout-
ed through an electrical knockout in the front of the unit.
See Figure 12 and Figure 13 on page 13. A remov-
able terminal block simplifies hookup. See Figure 20.
To remove it, gently pull it straight out from the control
board. Thermostat connections are made as described
in the following diagrams.
Figure 20: HP-5 Controller
Fixed 8-Pole Terminal Block (P2)
Removable 8-Pole Terminal Block (P1)
Figure 21: Thermostat Wiring With Night Setback/Night Setup and Emergency Shutdown