Mamiya 645DF, Руководство пользователя

Страница: 94 / 149

94
9.6 Mirror Up Delay
To change from the Self-timer to the Mirror Up setting, press the
shutter button so the mirror goes into the upright position. Once the set
time has expired, the shutter releases, and the mirror returns to the lower
position. Separately purchased electronic cable release RE401 can be
used to eliminate camera shake.
When using autofocus, the operational method is the same as steps 1 to
3 when using M.UP and autofocus.
1-3 (reference steps 1-3 in the Mirror Up Autofocus method).
4. Press the Self-timer button and turn the front dial to ON .
5. Turn the rear dial to select the time needed. 0.5 seconds to 10
seconds allows for increases by the second, 10 to 90 seconds
increases by 10 seconds per turn. For 2 to 10 minutes the value
increases by the minute and 10 to 60 minutes increases by 10
minutes per turn.
6. Frame the subject through the viewfinder and half press the shutter
button to ensure the focus and framing is correct.
7. Press the shutter button and the mirror goes to the upper position,
then after the exposure the shutter releases and the mirror returns to
the lower position.
Electronic Shutter Release Contact
For Mirror Up, long exposure, or slow shutter shooting, use the magnetic
cable release RE401 or the remote control RS402. The assisting release
contact is to insert the cable.
Eyepiece Shutter
Close the eyepiece shutter when there is a strong light source behind the
camera.
P Av
Tv
M
X
CF
C1
C2
C3
P Av
Tv
M
X
CF
C1
C2
C3