Mamiya 645DF, Руководство пользователя

Страница: 11 / 149

11
2.0 The 645DF
+
Camera
and Credo Digital Back
System
The Mamiya Leaf Camera system is created to provide as much flexibility
and openness as possible. Follow the instructions below to setup and
use your Mamiya Leaf camera system.
2.1 Charging the Batteries for the Credo Digital Back
Charge the batteries as soon you unpack the camera system.
Although only one battery can be used in the Leaf Credo back at a time,
it is recommended to charge both batteries fully before you start.
Always keep a battery in the Leaf Credo back even when shooting
tethered to a computer via a FireWire or USB connection. Go to page 80
for more details about charging the battery while tethered to a computer.
The battery charger can adapt to voltages within a range of 110 to 250
volts. It comes with an international set of power adapters. Select the
appropriate one that fits your outlet and slide it in from the top to mount
it in place securely.
Connect the unit to the outlet and charge the batteries (approximately
2.5 to 3 hours).
Purchasing Extra Batteries
The Leaf Credo back comes with two batteries (2900 mAh). You can
purchase additional batteries or use Canon BP 915 batteries.
Some third party batteries may not fit into the digital back’s battery
compartment due to differences in the tolerances. Do not try to force a
battery into the compartment. When pressing the battery release button
it should slide in without being hindered.
Warning!
• Only use the charger to charge the specified batteries.
• Do not allow charger to get wet or exposed to moisture.
• Keep the charger out of reach of children.
• Once charging is completed, unplug the charger from power source.
• Only use the original mains adapter, 12V DC or car lead.
• Never apply excessive force when connecting or disconnecting a
battery or contact plate.
• Keep all contacts clean.
• Do not force down any of the contacts.
• Do not short-circuit the contacts.
• Never store the battery connected to the charger for an extended
period of time.
• Do not expose to excessive heat or naked flame.
• Do not dismantle or carry out any alteration to the product.
• Do not attempt to eat or swallow the battery.