Mamiya 645DF, Руководство пользователя

Страница: 140 / 149

140
18.1 Using the 2-shot Release
The Leaf Credo back can be used with mechanical shutters that can be
fired twice within four seconds. The first release of the shutter activates
the digital back; the second release is for the exposure. If the time limit of
four seconds is exceeded, the camera gives a warning ‘beep’ followed
by a
2-shot error warning that is displayed on the LCD screen.
There are several automatic or semi-automatic 2-shot solutions available
from third party manufacturers for use with a mechanical shutter. Please
ask your dealer for more information.
18.2 Using the 1-shot Release
The 1-shot release cable is created to simplify your studio workflow.
1. Connect the flash exit (circled left) to the shutter and plug the opposite
end to the multi-pin port on the Leaf Credo back (via Part# 50300144
from multi-connector to mini jack female).
2. Connect a flash sync lead to the port on the Leaf Credo back.
3. Close the shutter if necessary.
4. Push the button (circled left) on the 1-shot release lead to ‘wake up’
the camera back and take the shot within a few seconds.
Note: It is not possible to control the exposure or trigger the shutter from
Capture One when using a fully manual camera. Only limited EXIF data
is recorded when shooting with manual cameras. The Leaf Credo back
adds a calculated approximate shutter speed but the aperture value is
not recorded.