Mamiya 645DF, Руководство пользователя

Страница: 36 / 149

36
Notice:
When the exposure is compensated
in the Manual mode, the difference
between the metered value and the
compensated value is displayed on the
viewfinder LCD. In the B (Bulb) mode,
the difference with the metered value is
not displayed.
Increment of the aperture and shutter
speed value can be set at either 1/3 or
1/2 stop.
The assignments of the front and rear
dials can be swapped.
Rotation direction of the dials that
change the values can be altered.
The selected aperture and shutter
speed can be locked.
Notice:
When the set value matches with the
metered value, the difference indicator
shows
0.0 .
Manual Mode (M)
This mode is used to set both the aperture and shutter speed for total
exposure control. Varying shutter speeds can be selected, including
Bulb
,
tIME
and manually from 60 minutes to 1/4000 second. Aperture
values can be set from maximum to minimum aperture.
1. Turn the exposure mode setting dial to M (Manual) position.
2. Turn the rear dial to set the desired aperture.
3. Turn the front dial to set the desired shutter speed.
4. When the shutter release button is half pressed, the difference
between the present settings and the metered value is displayed
in the viewfinder’s LCD panel. The value is displayed in 1/3 stop
increments within a range of ±6 EV.
When the difference between the set value and the metered value is
greater than ±6 EV and the set value is lower than the metered value, the
indicator in the viewfinder LCD shows “
– u – ”. Contrarily when the set
value is higher than the metered value, the indicator shows “ – o – ”.
P
Av
Tv M
X
CF
C1
C2
C3
A
P
Av
Tv M X
CF
C1
C2 C3