Mamiya 645DF Скачать руководство пользователя страница 129

Страница: 129 / 149

129

16.0 Leaf Credo Back for

Hasselblad H Series

The Leaf Credo (H-mount) digital back is designed specifically for
Hasselblad H1 and H2 cameras.

16.1 Mounting the Leaf Credo back on the Hasselblad H1/H2

1.  Place the bottom of the Leaf Credo back in the locking mechanism.
2.  Lever the back into place.
3.  Do not let go of the back until you hear a clicking noise that signals

the back is locked into position.

Note:

It is important to ensure that the bottom part of the Leaf Credo

back is attached correctly before the upper locking mechanism is
pressed together.

Removing the Leaf Credo back from the Hasselblad H1/H2

1. Rotate and press the silver button (illustrated left) to unlock the back.

(Ensure that the back is supported in your hand before pressing this
button).

2. Gently lever away the top of the back first. Be careful with the

contacts and protective glass on the back.

Note:

Your Leaf Credo back should always be protected by its plate

when it is not attached to the camera.

Содержание 645DF






















































































































































Результаты поиска

Содержание 645DF

Отзывы:

Похожие инструкции для 645DF

Бренды по названию

Популярные бренды

Mamiya 645DF, Руководство пользователя

Результаты поиска

Содержание 645DF

Отзывы:

Похожие инструкции для 645DF

Бренды по названию

Популярные бренды