MallinCam SDI Camera, Руководство пользователя

Страница: 10 / 59

MALLINCAM SDI User Manual November 11, 2014
SDI User Manual Page 7
2. Making Connections
The MALLINCAM SDI Camera
(Connection Diagram)
Connecting the Mallincam SDI to Monitor
The MallinCam SDI provides two video outputs: Composite and SDI both of which
utilize a BNC connector. Since composite and SDI signals are different formats,
with HD-SDI packing a lot of data, different types of video cable are
recommended. Rock provides the composite cable with the Deluxe Package,
which you can use for both composite and SDI, but if you require a long length
of cable for SDI output, you can Google SDI cables to locate a supplier of
dedicated SDI cable for you to use. This dedicated SDI cable will provide the
best image possible with the Mallincam SDI.
Composite Video
The Composite Signal is obtained by connecting the included 10m MallinCam
Video Cable from the Video-Out adapter of the camera (see
①
in the
connection diagram) to the Composite Video-In Adapter on your monitor ( since
in most monitors, the Composite Video-In connector is a RCA style, MallinCam
provides a BNC to RCA adapter to facilitated that connection
) or composite
adapter on your Video Capture Device (MCV-1) if you are using a computer.
To connect, just align the two little openings on the BNC cable ( male ) with the
two notches on the adapter’s BNC (f emale ) connector, push and twist so the
notches slide into place. This locks the connector to the Mallincam cable.
1 Composite Video Out (BNC)
2 SDI Video Out (BNC)
3 12V Power in (12V)
4 RS485 Communication
①
②
③
④