MALLINCAM SDI User Manual
November 11, 2014
SDI User Manual
Page 52
Appendix E – First Aid for the Mallincam SDI
The Image from the MALLINCAM SDI is jumping all over
the place
Diagnosis:
The camera is not getting a proper video signal.
Cure:
Check to make sure that the correct type of video cable is snuggly
connected from the Mallincam SDI to the Computer.
Are you using the SDI output on a composite camera?
Is the SDI output resolution 1080p vs 720p matching the expected
input resolution (including fps)?
When I have my Video Software connect to my
Mallincam through my MCV-1 adapter I only see a Blue
screen.
Diagnosis:
The MCV-1 or other adapters can have multiple video input
connections. For example the MCV-1 has both composite and S-
video. The cause of this symptom is that MallinCam is looking at one
of those input ports, while the camera is sending the image through
the other. Your Video Display software then just gives a Blue screen
to say that I see nothing at the MCV-1 source.
Cure:
Set the video to use the Composite Source on the x2828
(MCV) video driver and
Содержание SDI Camera
Страница 59: ......
