MallinCam SDI Camera, Руководство пользователя

Страница: 14 / 59

MALLINCAM SDI User Manual November 11, 2014
SDI User Manual Page 11
Upon Powering up the SDI Camera, its Menu will revert back to the last
time you saved the settings. That is, when you last used the EXIT
command on the On Screen Menu .
3. Operating the MALLINCAM SDI
Now is the time to do a quick check of the MALLINCAM SDI Camera to see if you
can obtain a video signal. This walk through assumes you have a monitor with a
Composite input capabilities (
or a Laptop with a Video Capture Device
attached and configured along with Video Display Software ). Place your
MALLINCAM SDI Camera on your telescope and point the telescope at a
recognizable object. Power up your MALLINCAM SDI Camera and monitor (start
your Video Display Software if you are using a Computer). It is best to check out
your MALLINCAM SDI Camera in the daytime, so you can more easily check out
the connections.
If you have connected everything
correctly you should be seeing an
image either on your monitor or in the
image window of your computer’s
display software. Use the focus of the
telescope to bring the image to
focus.
Press and release the Centre Button
on the back of the MALLINCAM SDI.
You should see the camera’s
On
Screen Menu pop-up on top of your
image with FOCUS ADJ Highlighted.