MallinCam SDI Camera, Руководство пользователя

Страница: 49 / 59

MALLINCAM SDI User Manual November 11, 2014
SDI User Manual Page 46
are ready). The changes will not be activated until you CLICK on the Green OK symbol in
the window.

LEFT CLICK inside the NSN video Window to bring up the Camera Settings
Window .

Use the sliders for Band Width and Picture values. I usually have both of my
sliders way on the right. Over time you will find the sweet spot for your system.

Select your Resolution from the Pull Down Menu . Start at 800x600 and move up
from there. Play with these to see what settings the NSN viewers say is the
best.

Select your Frame Rate . From its Pull Down Menu . I usually leave it at 15 fps,
but I have used 30 fps at times. Again trial and error for your system.

CLICK on the green OK symbol to accept these settings
That’s it, you are done. If everything is working well and the Window’s gods are in a good mood,
you should be broadcasting whatever object the MALLINCAM SDI is capturing. You should now
enter another Message and
SEND it out to indicate what system you are using and what object
you are viewing.
There is a time delay on what you say (if you have you microphone
activated) and do on your computer as compared to what others see
(and hear) on the NSN broadcast.
Note