Malibu Boats Response, Руководство пользователя

Страница: 87 / 112

4-3
Exterior
Your Malibu boat is highly resistant to weathering, water pollution and minor scrapes
which occur during normal use. However, regular care and maintenance of your boat is a
general responsibility for all Malibu boat owners. By following the boat care instructions
listed below, you will be able to extend the life and beauty of your Malibu boat.
Fiberglass and Gelcoat
The fiberglass hull and deck of your Malibu boat consist of a molded shell and exterior
gelcoat. The gelcoat protects the fiberglass shell and gives all Malibu boats a smooth and
shiny surface. The following are some general instructions which will help you maintain
your boat’s sleek appearance:
1) Wash monthly or more frequently, depending on use. Use a mild dish washing
soap and lukewarm or cold water. Rinse your boat with fresh water and wipe
down immediately to avoid water spots.
2) Wax the boat hull and deck after every three or four outings to decrease water
friction and to lessen the potential for staining or spotting the gelcoat surface. In
cases where the original gelcoat shine cannot be restored by waxing, hand buff
the surface using any commercial compound. Be sure to apply several coats of
wax over the area that has been polished.
Surface Stains
Stains can appear as a result of dust, road tar, plant sap, rust from metal fittings and other
materials coming in contact with your boat’s exterior. Listed below is a step-by-step
procedure to remove stains from your boat:
1) Wash area with dish washing soap
2) Apply a mild cleanser on a small area (3 x 3 ft)
3) Rinse with fresh water
4) Buff with a fine rubbing compound
5) Wax
If the stain is not removed by the dish washing soap or mild cleanser, then the next
procedure is to use either denatured or rubbing alcohol. Common rubbing alcohol is
excellent for removing stains.
Scratches
Scratches to the gelcoat sometimes occur during normal use. Your dealer can usually
restore the gelcoat to like-new condition.
Underwater Corrosion
Corrosion occurs in saltwater conditions from the interaction of the saltwater and the
direct current of the battery. To prevent corrosion, it is important to keep the bilge area as
dry and clean as possible.
Chapter 4_08.qxd: Chapter 4 doc.qxd 11/12/07 3:39 PM Page 3