Malibu Boats Response, Руководство пользователя

Страница: 58 / 112

2-28
a. Beep 2nd
In the Beep 2nd mode, you can control Beep on or Beep 2nd by pressing VOL
up/down.
- Beep on: You can hear “beep” sound when you press any button.
- Beep 2nd: You can hear “beep” sound when you press any button over 1.5
seconds.
b. I-Vol
By pressing the SEL (2) button again, the unit will turn to I-VOL mode (Initial
Volume Level Adjustment). You can adjust the I-Vol to the level you want by
using VOL up/down button. After setting the initial level, the volume will
default to this level every time the unit is powered on.
c. Area Selection
By pressing SEL (2) button again, the unit will be in Area selection mode. Then
use VOL up/down button to choose USA or EUR. Press and hold BD/FN for 2
seconds to confirm and save selection.
d. SUB-W
By pressing SEL (2) button again, the unit will be in Sub-woofer selection
mode. Then press VOL up/down button to choose SUB-W on or off.
e. DSP
Choose from flat, classic, pop or rock by pressing the SEL (2) button again.
Adjust with VOL up/down button.
Volume Control
Press the VOL up/down button to increase or decrease the volume level.
- Bass control
Press VOL up to increase the bass.
Press VOL down to decrease the bass.
- Treble control
Press VOL up to increase the treble.
Press VOL down to decrease the treble.
- Balance control
Press VOL up to decrease the left speaker volume.
Press VOL down to decrease the right speaker volume.
- Fader control
Press VOL up to decrease the volume level of speakers connected to the rear
channel.
Press VOL down to decrease the volume level of speakers connected to the
front channel.
“MODE” Button (3)
Press this button to select Radio, CD, USB/NAND (internal memory), CDC, SIRIUS or AUX.
BD/FN Button (4)
In radio mode, press the BD/FN (4) button shortly to select the desired band:
FM1, FM2, FM3, AM1 and AM2.
In SIRIUS mode, press BD/FN (4) button to select the SSR1 and SSR2.
Chapter 2_08.qxd: Chapter 2 doc.qxd 11/12/07 3:32 PM Page 28