Malibu Boats 2012 21 Ride Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 164

background image

1-4

Education

If you have never owned a boat before, you can get an excellent introduction to boat
handling from organizations such as the U.S. Coast Guard, American Red Cross or your
local authority. Even if you are a veteran boater, these courses will help sharpen your
boating skills as well as bring you up to date on current rules and regulations. See your
local boating agency or Malibu dealer for information on classes in your area.

Insurance

The boat owner is legally responsible for damages or injuries he or she causes. Common
sense dictates that you carry adequate personal liability and property damage insurance
on your boat, just as you would on your automobile. You should also protect your
investment from physical damage or theft.

Restricted Areas

Before boating, check with Local, State and Federal authorities to identify restricted
areas. Because of the threat of terrorism, the U.S. Coast Guard has and will continue to
implement strict limits on watercraft near U.S. Navy and Coast Guard ships and other
potential targets.

Our Environment

As a boater, you already appreciate nature’s beauty and the peace of the great outdoors. It
is a boater’s responsibility to protect the natural environment by keeping waterways
clean.

DO NOT put anything in the water you would not want to eat or drink!

Conserve Fishery Resources

There is a tremendous drain on our fishery resources. Over-fishing and pollution have
strained the fish population. Do your part by keeping only what you will eat by practicing
catch-and-release.

Foreign Species

If you trailer your boat from lake to lake, you may unknowingly introduce a foreign
aquatic species from one lake to the next. Thoroughly clean the bottom of the boat, below
the water line, remove all weeds and algae, and drain the bilge and livewells before
launching the boat in a new body of water.

Fuel and Oil Spillage

The spilling of fuel or oil into our waterways contaminates the environment and is
dangerous to wildlife. Never discharge or dispose fuel or oil into the water; it is
prohibited and you could be fined. There are two common, accidental types of discharge:
• Overfilling the fuel tank.
• Pumping contaminated bilge water.

Fumes from rags can collect in bilge and be extremely
hazardous. Never store rags used to wipe up fuel or solvent
spills in the boat. Dispose of rags properly ashore.

Discharge and Disposal of Waste

Waste means all forms of garbage, plastics, recyclables, food, wood, detergents, sewerage
and even fish parts in certain waters - in short, nearly everything. We recommend you
bring back everything you take out with you for proper disposal ashore.

«
...
12
13
14
15
16
...
»

Содержание 2012 21 Ride





































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2012 21 Ride

Бренд: Lagoon Страницы: 122

Бренд: J Страницы: 30

Бренд: Bavaria Страницы: 29

Бренд: Viking Страницы: 6

Бренд: World Cat Страницы: 99

Бренд: BENETEAU Страницы: 28

Бренд: Vanguard Страницы: 31

WaveRunner FX SVHO 2017

Бренд: Yamaha Страницы: 118

Бренд: NorthStar Страницы: 2

Бренд: Four winns Страницы: 185

AR230 High output

Бренд: Yamaha Страницы: 126

2004 WaveRunner FX Cruiser High Output

Бренд: Yamaha Страницы: 144

Бренд: World Class Catamarans Страницы: 58

Бренд: Ventus Страницы: 54

Бренд: LRP Страницы: 24

Бренд: AXA Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды