manualshive.com logo in svg

Malibu Boats 2012 21 Ride, Руководство пользователя

У нас есть руководство владельца для лодки Malibu Boats 2012 21 Ride! Скачайте бесплатно руководство на нашем сайте manualshive.com и ознакомьтесь с полной информацией о вашем судне. Не упустите возможность загрузить руководство прямо сейчас!

Поделиться
Скачать
background image

4-3

Instrumentation

The in-dash graphical display, the MaliView screen, gauges and digital switch lenses
should only be cleaned with a damp, soft cloth with mild, soapy water. Ammonia-based
or harsh chemical cleaners will damage the lenses.

To care for the Malibu Touch Command, lightly wipe the surface of the touch screen
using a dry cloth or soft cloth with isopropyl alcohol or neutral detergent for cleaning the
touch screen in case of dirt or residue. Never use glass cleaners, which contain ammonia.
Never use organic solvents on the touch screen, except alcohol.

Exterior

Your Malibu boat is highly resistant to weathering, water pollution and minor scrapes
which occur during normal use. However, regular care and maintenance of your boat is a
general responsibility for all Malibu boat owners. By following the boat care instructions
listed below, you will be able to extend the life and beauty of your Malibu boat. 

Hardware

Most of the metal hardware on your boat consists of brass, stainless steel, or aluminum
and should be cleaned on a periodic basis with soap and water. In fresh water, metal
fittings and hardware should be sprayed regularly with a rust inhibitor and after every use
in saltwater.

DO NOT use cleaners that are not intended for use on stainless steel. Glass, tile, counter
or citrus cleaners can damage hardware permanently. Always follow cleaning, by
applying a high-quality metal polish or automotive wax after cleaning. Test products in
an inconspicuous area before applying to the complete surface, especially if you are not
familiar with the product.

All metal parts, including but not limited to tower accessories, board racks or speaker
cans, should be cleaned with mild soap and water frequently and waxed periodically. A
corrosion protectant is highly recommended on these components, especially for use in
areas of or in proximity to salt/brackish water. Pitting, corrosion or oxidation is not
covered under warranty. Pitting is not the same as separation.

Fiberglass and Gelcoat

The fiberglass hull and deck of your Malibu boat consist of a molded shell and exterior
gelcoat. The gelcoat protects the fiberglass shell and gives all Malibu boats a smooth and
shiny surface. The following are some general instructions which will help you maintain
your boat’s sleek appearance:

1)

Wash monthly or more frequently, depending on use. Use a mild dish washing
soap and lukewarm or cold water. Rinse your boat with fresh water and wipe
down immediately to avoid water spots.

2)

Wax the boat hull and deck after every three or four outings to decrease water
friction and to lessen the potential for staining or spotting the gelcoat surface. In
cases where the original gelcoat shine cannot be restored by waxing, hand buff
the surface using any commercial compound. Be sure to apply several coats of
wax over the area that has been polished. 

Содержание 2012 21 Ride





































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2012 21 Ride

Malibu Boats M235 2019 Owner'S Manual preview
M235 2019
Бренд: Malibu Boats Страницы: 238
PATHFINDER 2012 2300 HPS Owner'S Manual preview
2012 2300 HPS
Бренд: PATHFINDER Страницы: 20
Cobalt Digital Inc 263 Owner'S Manual preview
263
Бренд: Cobalt Digital Inc Страницы: 128
Cobalt Digital Inc 212 Owner'S Manual preview
212
Бренд: Cobalt Digital Inc Страницы: 124
Nauticstar 24 L Owner'S Manual preview
24 L
Бренд: Nauticstar Страницы: 84
Nauticstar XTS 195 Owner'S Manual preview
XTS 195
Бренд: Nauticstar Страницы: 80
Grady-White Boats BIMINI 306 Owner'S Manual preview
BIMINI 306
Бренд: Grady-White Boats Страницы: 78
Grady-White Boats CHASE 273 Owner'S Manual preview
CHASE 273
Бренд: Grady-White Boats Страницы: 82
Grady-White 330 Express Owner'S Manual preview
330 Express
Бренд: Grady-White Страницы: 112
Scarab jet boat Owenrs Manual preview
jet boat
Бренд: Scarab Страницы: 156
SeaDoo 2001 UTOPIA 185 Shop Manual preview
2001 UTOPIA 185
Бренд: SeaDoo Страницы: 11
Vanguard ZUMA Rigging Manual preview
ZUMA
Бренд: Vanguard Страницы: 6
Yamaha WaveRunner VXS 2015 Owner'S/Operator'S Manual preview
WaveRunner VXS 2015
Бренд: Yamaha Страницы: 108
Sailfish 240 WAC Owner'S Manual preview
240 WAC
Бренд: Sailfish Страницы: 37
Sailfish 236 CC Owner'S Manual preview
236 CC
Бренд: Sailfish Страницы: 40
Zodiac Wave Owner'S Manual preview
Wave
Бренд: Zodiac Страницы: 16
Oru Kayak BAY+ Assembly Manual preview
BAY+
Бренд: Oru Kayak Страницы: 20
Volvo Penta D4 Operator'S Manual preview
D4
Бренд: Volvo Penta Страницы: 138

Бренды по названию

Популярные бренды

Загрузить еще бренды