Makita LXRM01, Инструкция по эксплуатации

Страница: 5 / 16

5
Note:
To reset the system, you must put the radio in OFF
mode.
1. Press the Radio power button [ ] to turn off the
radio.
2. Press and hold both the preset button 3 [ ] and the
Radio power button [ ] for approximately
5 seconds. When the LCD shows a display of all the
icons, all the preset memories are back to factory
default.
Using flash light (Fig. 7)
WARNING:
To reduce the risk of injury, do not look directly into the
light when the work light is on.
WARNING:
To reduce the risk of injury, DO NOT operate work light
without bezel assembly in place.
Using and adjusting the pivot head
Press the flash light button [ ] to switch on/off the
flashlight when the radio is either on or off.
Note:
The pivot head can pivot to a range of 150 degrees and
can be adjusted in 6 stages. Pivot head to desired
position. Allow the detent to snap into place.
Important:
Do not forcibly pivot the head.
LCD back light
Press any control buttons, LCD display will illuminate for
approx. 10 seconds.
Specifications
Maintenance
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by a
Makita Authorized Service Center.
Model LXRM01
Power source D.C.14.4 V/18 V
LED 1.4 W x 3
Tuning Frequency Range
AM: 520-1,710 kHz
FM: 87.5-108 MHz
Speaker ø51 mm 8

3 W
Output Power (18 V) 3.0 W
Only Radio Only Light Radio/Light
Operating time
(with radio output power 100 mW)
BL1415 11 hours 3.5 hours 2.5 hours
BL1430 25 hours 8.5 hours 6 hours
BL1815 11 hours 3.5 hours 2.5 hours
BL1830 25 hours 8.5 hours 6 hours
Dimension
(With Battery BL1430)
263 mm x 75 mm x 196 mm (10-3/8” x 2-15/16” x 7-3/4”)
Net weight
0.95 kg (2.1 lbs) (with battery BL1415)
1.14 kg (2.5 lbs) (with battery BL1430)
1.01 kg (2.2 lbs) (with battery BL1815)
1.23 kg (2.7 lbs) (with battery BL1830)