6-6
Flywheel
6-6-1
Disassembling
[1] Remove Clutch. (See 6-5-1 Disassembling.)
6-6-2
Assembling
[1] Assemble by reversing the disassembling procedure.
Fig. 6-6-2-2
[3] Set 1R372 into the threaded hole for Spark plug.
Tighten M6x16 Hex head bolt to 9-11 N
・
m with
1R219, 1R220 and Hex socket 10.
[4] Set Clutch section in place. (See 3-4-5-2 Assembling.)
Fig. 6-6-1-2
1R364
[4] Remove Flywheel with
1R364.
Flywheel
[3] The center hole is
made by tightening
M6x16 Hex head
bolt.
Fig. 6-6-2-1
[2] Assemble Flywheel to Crankshaft assembly with
Woodruff key while aligning the keyslot to the keyway.
Flywheel
Note:
Remove oil/grease
from their taper
portions with a spray
parts cleaner.
Set 1R372.
1R219
1R220
Remove Spark
plug.
Fig. 6-6-1-1
[2] Remove M6x16 Hex head
bolt (right hand thread) with
Socket bit 10.
Socket
bit 10
M6x16 Hex
head bolt
18 / 40