6-3-2
Assembling
[1] Assemble by reversing the disassembling procedure.
Note:
First assemble Cutter shaft, then assemble Spiral bevel gear 14.
6-4
Control lever assembly
6-4-1
For EBH252U and EBH253U
6-4-1-1
Disassembling
Fig. 6-4-1-1-1
Remove two M6x25 Hex socket head bolts, then remove Pipe clamp from Pipe shaft.
Pipe shaft
Pipe clamp
M6x25 Hex socket head bolt
(2 pcs.)
Fig. 6-3-2-1
[2] When the gear room is cleaned up, apply 8g of Makita grease FA No.2 in either of the following ways:
·
during assembling: apply grease into Gear case assembly
·
after assembling: apply grease from the threaded hole for M8x10 +Hex bolt with a grease gun
Gear case assembly
8g
11 / 40
