Makita DBC340, Инструкция по эксплуатации

Страница: 14 / 24

14
Putting on the harness
- Place the harness over both shoulders so that the hip
pad ( C/3 ) is located on your right hand side.
- Adjust the harness until the chest plate ( C/4 ) Þ ts across your
chest.
- Adjust the height of the hip pad means by of the chest
strap until the Þ xing hook is located about one hand’s width
above the hip bone.
- To open the harness detach the chest plates. The harness
and the brushcutter can then easily and quickly be remo-
ved.
Balancing the brushcutter
- To remove the brushcutter, Þ rst depress the lock ( F/6 )
and then detatch the brushcutter from the Þ xing hook.
G
- The ground clearance will depend on the kind of cutting
tool selected.
- When using the trimmer head on a level terrain, the trimmer
head should touch the ground lightly without the user
having to hold the unit.
- In dif Þ cult terrain or when using the steel bush cutter or
8-tooth eddy blades the brushcutter should balance about
30 cm above the ground without the user having to hold
the unit.
- Fill the fuel tank and attach the brushcutter to the Þ xing
hook ( E/5 ) located on the waist pad.
- 5 boreholes are provided for the correct personal balan -cing
of the brushcutter .
C D
3
4
E F
5
6