MAJORSINE Inverter Manual / M101.4
Page 8
2. IMPORTANT SAFETY INSTRUCTIONS
2-1 Safety Statement
SAVE THESE INSTRUCTIONS - This manual contains important
inverter instructions that should be followed during installation and
maintenance of the MAJORSINE inverter unit.
To reduce the risk of electric shock, install the inverter in a
temperature and humidity controlled indoor environment, free of
conductive contaminants. Ambient temperature should not exceed
50
o
C (122
o
F).
¾
Depending on use, the AC output of the inverter may require a
customer installed disconnect or fusing. For telecom use, a
GFCI has not been provided. The inverter offers standard AC
short circuit protection.
¾
The following precautions should be respected when working
on the inverter:
¾
Remove watches, rings, or other metal objects.
¾
Use tools with insulated handles.
¾
Wear rubber gloves and boots.
2-2 Additional Safety Notes
¾
Upon receipt, examine the shipment box for damage. Notify
the carrier immediately, before opening if damage is evident.
¾
Do not open or disassemble the inverter, warranty will be
voided.
¾
Do not operate near water or in excessive humidity.
¾
Keep liquid and foreign objects from entering the inverter.
¾
Install the inverter in a well-ventilated area. Do not block front
air vents, or rear air exhausts of the unit.
¾
Do not operate the inverter close to combustible gas or open
fire.
¾
Do not plug appliances with surging loads, or half bridge
rectified loads, into the inverter.
¾
Do not operate the inverter if the unit is leaking any liquid or if a
white powdery residue is found to be present.
¾
Temperature: The inverter should be operated in an ambient
temperature range of 0°C to +50°C or output efficiency may be
affected. Air flow to the inverter must not be impeded.
