MAJORSINE Inverter Manual / M101.4
Page 25
e)
When the input bypass is “over” normal frequency
range, LCD shows.
** BYPASS AC **
OUT OF FREQ.
f)
When the output is overloaded, LCD shows.
** BYPASS AC **
OVER LOAD
D) Input DC status
a)
When the input DC voltage is normal.
** INPUT DC **
NORMAL
b)
When the input DC voltage is under threshold, the
LCD shows.
** INPUT DC **
LOW VOLTAGE
c)
When the input DC voltage is over threshold, the LCD
shows.
** INPUT DC **
HIGH VOLTAGE
d)
When the input DC voltage is under voltage, the
INVERTER will switch to bypass mode (if bypass AC
is available) and LCD shows.
DC UNDER VOLT
INVERTER OFF
