The Majestic Shower Company Limited
One North Place, Edinburgh Way, Harlow Essex
CM20 2SL England,
Tel44 (0) 8448 001 500
Fac44 (0) 1279 635 074
[email protected] www.majesticshowers.com
37
Position the hinges centrally in their slots. With gaskets inserted,
loosely screw the hinges and faceplates together through the
glass door panel slots.
Adjust the door so it is level with the two glass panels; the
gaskets should be neat and flush, and the end of the glass door
should not protrude beyond the hinges. Tighten the Allen bolts.
38
The other 1936 door-to-glass seal (2) should
be cut into three pieces to fit vertically above,
between and below the hinges on the end of
the door.
Open the door outwards and slide the sections
into place on the door. If necessary, adjust the
door on its hinges so that it closes correctly
onto the in-line panel seal.
2
39
Mark the width of the glass door panel on
the 1915 under-door seal (3); cut the seal
to length, and slide it onto the bottom of
the door.
40
Trim the 45° internal blade off the 1915 under-door seal so it
misses the vertical 1936 seal.
3
