The Majestic Shower Company Limited
One North Place, Edinburgh Way, Harlow Essex
CM20 2SL England,
Tel44 (0) 8448 001 500
Fac44 (0) 1279 635 074
[email protected] www.majesticshowers.com
Glass
Return
Panel
10mm
Spacer
Glass
Return
Panel
10mm
Spacer
15
As shown, run beads of silicone along the inside of the vertical
wall profile and the horizontal return profile only, not the front
inline profile.
16
Using the suction glass lifters, replace the glass return panel
into the silicone-lined profiles; remember to leave a 10mm
gap for the glass inline panel, as shown. Use the 10mm
spacer to help.
Glass
Return
Panel
10mm
Spacer
13
Run a bead of silicone along the base of the horizontal return
profile, and reposition it on the tray or floor where marked; use
the 10mm spacer to ensure it is aligned with the vertical wall
profile and push the mitred ends together; tape into position.
Remove the 10mm spacer and apply a generous amount of
silicone into the corner joint. Reinsert the noted rubber strips
into the horizontal return profile.
14
Use the 10mm spacer to align horizontal inline profile B to the
end of the horizontal return profile, so the mitred ends fit
together; tape the profile into place and mark its position.
The horizontal inline and return profiles must be at 90°
to one another.
Glass
Return
Panel
10mm
Spacer
