The Majestic Shower Company Limited
One North Place, Edinburgh Way, Harlow Essex
CM20 2SL England,
Tel44 (0) 8448 001 500
Fac44 (0) 1279 635 074
[email protected] www.majesticshowers.com
(Size of profile A
after cutting)
(In-line profile B)
(Door panel C + 9mm)
Glass
Return
Panel
10mm
Spacer
(D)
Glass
Return
Panel
10mm
(Size of profile A
after cutting)
(In-line profile B)
(Door panel C + 9mm)
Glass
Return
Panel
10mm
Spacer
(D)
Glass
Return
Panel
10mm
1 1
Put the brackets to one side and use the suction glass lifters to
remove the glass return panel. Remove the horizontal return
profile; unscrew and remove the vertical wall profile. Drill 7mm
holes where marked on the wall; insert Rawl plugs.
12
Run a bead of silicone along the wall side of the vertical wall
profile, and screw it tightly into place. Loosely screw the glass-
to-wall brackets to the wall.
Glass
Return
Panel
10mm
Spacer
9
Using a metal scriber, mark the vertical profile level with the top
of the glass. The glass return panel can be moved backwards or
forwards in the return profile to help you position the front
profiles, but the glass must be inside the vertical wall profile by
at least 5mm along its entire height.
10
Disassemble two glass-to-wall brackets, being careful not to
damage the faceplates. With the clear plastic gaskets inserted
and wall screw plates facing inwards, align the brackets centrally
to the holes in the glass return panel; hold them in place and
mark the screw holes.
Glass
Return
Panel
10mm
Spacer
