MAINE ENERGY SYSTEMS AutoPellet Air TOUCH 17, Руководство по установке

Страница: 54 / 76

54
Malfunction report
13.3 Bus (Fault 4005, 4006, 4007, 4015, 4016)
Display: [4005] BUS HCR
Description: Time-Out of BUS-connection from touch operating device to heating
controller
Cause and Remedy: Wrong cable connection
►
Check cable connection
No power supply available
►
Connect heating controller to BUS
Fuse in heating controller
defect
►
Replace fuse
Display: [4006] BUS PE
Description: Time-Out of BUS-connection from touch operating device to Furnace
controller
Cause and Remedy: Wrong cable connection
►
Check cable connection
No power supply available
►
Connect heating controller to power supply
(X21)
Fuse in heating F2 defect
►
Replace fuse F2
Display:
[4007] BUS Remote
Description: Time-Out of BUS-connection of remote control
Cause and Remedy: Wrong cable connection
►
Check cable connection
Remote controll defect
►
Replace remote controll
Display: [4015] BUS Remote Touch
Description:
Time-Out of BUS-Connection from remote controll to Touch operating device
Cause and Remedy: Wrong cable connection
►
Check cable connection
Wrong softwareversion
►
Check version of software
Display: [4016] BUS Master
Description:
Missing BUS connection to master-operating device
Cause and Remedy: Wrong cable connection
►
Check cable connection
13.4 Combustion chamber sensor (Fault 5010, 5011, 5048, 5049)
Display: [5010] PE Combustion sensor BS
Description: Combustion chamber sensor fracture, measuring circuit from combustion
chamber sensor is open – Input FRT
Cause and Remedy: Sensor not connected
►
Connect sensor at input
Sensor defect
►
Measure sensor (approx. 5 mV at 257 °F) re-
place if required
Sensor cable defect
►
Replace sensor
Sensor temperature too
high
►
Sensor temperature above measuring range
(2012 °F)
Display: [5011] PE Combustion sensor SC
PE 603 USA_FA 1.0