MAINE ENERGY SYSTEMS AutoPellet Air TOUCH 17, Руководство по установке

Страница: 41 / 76

Cable routing
41
9.2 Cable routing
Reroute cables after dismantling the casing or other system components.
R Riissk k o off e elle ec cttrriic c ssh ho oc ck k
Switch off the system before performing work on the
Furnace.
Note the following points to ensure the cables are routed securely:
Cables must not be routed:
• over moving parts
• over hot parts
• over sharp edges
Cables must be:
• routed in the cable ducts provided
• through cable leadthroughs
• tied together
• secured with cable ties at the points provided
• Power cables must be routed in the right-hand duct and sensor cables must be routed in the left-hand
duct.
R Riissk k o off e elle ec cttrriic c ssh ho oc ck k
Check cables for damage..
Replace any cables that are damaged.
D Da am ma ag ge e tto o tth he e F Fu urrn na ac ce e c co on nttrro olllle err
Before fitting the casing components, make sure that all
cables are connected to the correct points on the con-
troller! Failure to do so can lead to damage to the con-
troller, and such damage is not covered by warranty!
Installation Manual AutoPellet Air Furnace 17 — 28