Operation Manual MA 42
8100460 Rev.7 Ver.1
46
12/15
These menu items are available (bold reflects default setting):
Frequency Settings
Frequency
Default frequency Set
(On/Off): Set default
frequency if side,
transducer or signal type
has changed
Frequency roll
Back: Frequency control
jumps to 1000 Hz if the
highest and lowest
frequency was reached
Stop: Frequency control
function stops at highest
and lowest frequency
Wrap: Jumps to the
lowest/highest frequency
when the highest/lowest
frequency is reached
Standard frequencies
Select/deselect: Lists
available frequencies in
device (all on)
Level
Default level
On/Off: Set default level
after changing signal type
Level Steps
5; 2; 1
Inverse Dialing
Change effect on dialing an
encoder. This will change
the direction of rotation of
the dial required for
increasing or decreasing the
level of the signal (Dial Up;
Dial Down)
Speech level unit
dBSPL/dBHL: select the level
unit for speech signals
Signal
Default signal types
Defines which signals are
selected by default:
Signal/Noise or
Signal/Signal
Swap function
Defines what happens if
Swap is selected:
Содержание MA 42
Страница 1: ...Operation Manual MA 42...
Страница 2: ......
