Maico ER GH, Инструкция по монтажу

Страница: 3 / 32

Table of contents
3
Fig. 1: Overview of ER EC system
ER GH recess-mounted housing with
plastic shutter
1 ER GH housing with housing floor seal
and 3 snap-fit fasteners for fan insert.
Housing for exhaust direction upwards,
right, left or at rear
2 Exhaust socket Ø 75/Ø 80 (plastic):
Installation with socket above or at rear
3 Airstream-operated shutter: Figure with
housing installation position “air outlet above”
4 Plaster protective cover
S Housing segment for second room
connection
ER EC fan insert
5 Spiral housing
6 Exhaust adapter: Air outlet above
(factory setting)
7 Exhaust adapter: Air outlet at rear
Covers: Fig. 1 with ER-AB
ER-A, ER-AK and ER-AH not shown
8 Cover – lower part with central screw
9 G2 air filter
10 Cover – upper part
Second room connection for toilet seat
air extraction
11 ER-ZR second room connection set:
11.1 Installation socket Ø 75/Ø 80
11.2 Adapter
11.3 Internal grille
11.4 G2 filter mat
12 Suction duct for second room connection:
For toilet seat air extraction (Ø 70)
13 ER-AS extraction socket (Ø70) for toilet
seat air extraction
①
Rating plate
② Wiring diagram (Tick device type)
③
TÜV (German Technical Inspection
Agency) sticker
Table of contents
1. Scope of delivery ...................................... 4
2. Specialist installer qualifications ................ 4
3. Intended use ............................................. 4
4. Safety instructions and warnings .............. 4
5. Operating the fan ...................................... 7
6. System and product information ............... 7
6.1 Certificates of approval ..................... 7
6.2 Installation conditions ........................ 7
6.3 Permitted exhaust air systems .......... 8
6.4 Possible combinations ...................... 8
7. Environmental conditions and operating
limits ...................................................... 11
7.1 Regulations for operation with
fireplaces .............................................. 11
8. Technical data ...................................... 11
9. Storage ................................................. 12
10. Mounting preparations .......................... 12
10.1 Requirements in line with approval .. 12
10.2 Preparations for wall installation .... 13
10.3 Ceiling installation preparations .... 14
10.4 Preparations for the electrical
connection ............................................ 16
10.5 Preparing the shutter .................... 16
10.6 Conversion of exhaust socket
for air outlet towards rear ...................... 17
10.7 Conversion of exhaust adapter
for air outlet towards rear ...................... 18
11. Housing installation ............................... 19
11.1 Installing ER GH housing .............. 19
12. Electrical connection ............................. 24
13. Final assembly ...................................... 26
13.1 Attaching fan insert ....................... 26
13.2 Attaching cover ............................. 26
13.3 Key lock ........................................ 26
14. ER-AS extraction socket for
WC odour extraction ............................. 27
15. Spare parts ........................................... 27
16. System and accessory components ...... 28
16.1 System components ..................... 28
16.2 Accessory components ................. 28
16.3 Air filter .......................................... 29
17. Dismantling ........................................... 29
18. Environmentally responsible disposal ... 29
19. Wiring diagrams .................................... 30
Acknowledgements: © Maico Elektroapparate-Fabrik
GmbH. Translation of the original German operating
instructions Misprints, errors and technical changes are
reserved. The brands, brand names and protected trade
marks that are referred to in this document refer to their
owners or their products.