Maico ER GH AP, Инструкция по установке и эксплуатации

Страница: 8 / 28

7 Technical data
8
6.5 Covers: Functions
ER-A ER-AK ER-AH ER-AB
Filter change indicator
(6 months) with TimeStrip ●
Filter change indicator
(6 months) with LED ● ● ●
Control with time module ● ● ●
Control with fully automatic humidity control: Extraction
takes place automatically if the specified switch-on hu-
midity is exceeded. ●
Control with motion detector. Full load level after motion
is detected (range motion sensor is 5 m) ●
Barrier-free product, as it switches itself on and off auto-
matically ● ●
Not speed controllable ● ● ● ●
Electrical plug connection for quick connection of the ER
EC with ER GH housing and ER-AK, ER-AH or ER-AB
with the ER EC fan insert. ● ● ●
Air volume – base load 30 m³/h for continuous operation ● ● ● ●
Air volume of the base load and full load levels can be set ● ● ●
Additional air volumes that can be set
in base load: 20 m³/h, 40 m³/h, 60 m³/h or 100 m³/h and
in full load: 20 m³/h, 30 m³/h, 40 m³/h or 100 m³/h ● ●*** ●
Full load level on/off via light switch or separate switch.
During manual operation (e.g. using light switch), the
start delay and overrun time apply. ● ● ● ●
Full load operation (60 m³/h) with start delay of 60
seconds and overrun time of 15 minutes, non-adjustable ●
Full load operation (60 m³/h), start delay can be set with
0, 30,
60 *, 90 or 120 seconds
● ● ●**
Overrun time of the full load level can be set for 0, 3, 6,
15 *, 24 or 30 minutes
● ● ●
Adjustable interval control for ventilating rooms that are
not regularly used. Time interval can be set for
0 *, 1, 2, 4,
6 or 12 hours, 10 min. operating time per interval
● ● ●
Interval control can be switched off. ● ● ●
Switching option: The base load can be switched on or
off by an additional switch (
Wiring diagram [
}
23] ).
● ● ● ●
* Factory setting: Tolerance of time details max. ±
5 %
** For the ER-B, the start delay only affects the
light switch operation.
*** For ER…H humidity control in full load, 60 m³/
h and 100 m³/h can be set.
7 Technical data
7.1 Environmental conditions and op-
erating limits
• Permissible maximum temperature of air me-
dium + 40 °C.