Maico ER GH AP, Инструкция по установке и эксплуатации

Страница: 21 / 28

12 Operating the unit
21
2. Insert the air filter and fold down the upper
part of the cover (upper part must audibly en-
gage).
3. Run function test: Test all unit functions (over-
run time, interval, humidity control etc.).
11.3 Key lock
If a key lock is desired, activate the key lock on
the ER-AK, ER-AH or ER-AB cover (it is deactiv-
ated in the factory).
1. To do so, push button + and - at the same
time for 5 seconds .
ð The 5 LEDs flash briefly 3x.
To cancel the key lock, repeat the procedure.
12 Operating the unit
ER EC fans run at 30 m³/h in base load opera-
tion (factory setting).
A light switch or separate switch can be used to
switch to
full-load operation with 60 m³/h .
The unit control is located in the cover: ER-AK,
ER-AH and ER-AB have automatic functions with
unit parameters that can be set:
Covers: Functions
[ } 8] .
• ER-A: Standard model
• ER-AK: Comfort model
• ER-AH: Model with humidity control, barrier-free
• ER-AB: Model with motion sensor, barrier-free
For full load operation, a
start delay of 60
seconds and an overrun time of 15 minutes are
specified at the factory .
Ensure sufficient supply air during opera-
tion.
If the unit is switched on and off manually,
function is not always ensured in accordance
with DIN 18017-3.
13 Spare parts
Spare parts may only be sourced from and
fitted by a specialist installer.
Designation Article no.
Exhaust socket with
backflow preventer
ABSM RK ER-UPD/-
UPB E093.0977.0001
Exhaust socket made of
plastic
ABSK ER-UPG/ER-AP E059.0884.0001
Shutter support with
backflow preventer
KA RK K E093.0608.0001
Air outlet element
AEH AP ER EC E093.1627.0000
Terminal block KL ER E157.0326.0000
In case of questions, please contact:
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen, Deutschland
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail:
ersatzteilservice@maico.de
Spare parts can be ordered at
www.shop.maico-ventilatoren.com .
14 System and accessory com-
ponents
14.1 System components
ER EC fan insert
Article no. 0084.0360
• Fan insert for installation in ER GH flush-moun-
ted/surface-mounted housing. Air volume 30
m³/h, 60 m³/h. In combination with an intelligent
cover for the base load and full load, further
volumetric flows can be set (see covers).
• Air outlet adapter with air outlet facing upwards
(factory setting).
• Air outlet adapter with air outlet facing the rear
(can be converted without tools).