Maico ER GH AP, Инструкция по установке и эксплуатации

Страница: 23 / 28

17 Wiring diagram
23
Dispose of the packaging material in an environ-
mentally-friendly way, in compliance with the reg-
ulations valid in the country where you are.
Dispose of the
air filter in an environmentally-
friendly way, in compliance with the regulations
valid in the country where you are.
At the end of its service life, dispose of the unit in
an environmentally-friendly way, in compliance
with the regulations valid in the country where you
are.
17 Wiring diagram
Wiring diagrams
Tolerances for the stated times = nominal
value ± 5 %
Values that can be set with optional cover with in-
tegrated electronics:
• ER-AK, ER-AH, ER-AB: Start delay and over-
run time
• ER-AH: Humidity control
• ER-AH: Motion detector
For ER-A cover:
• Start delay of 60 seconds
• Overrun time of 15 minutes.
Connection variants, base load/full load for
ER-A, ER-AK, ER-AH and ER-AB
Nominal load can be
switched Nominal load can be
switched with permanent
base load Base and nominal load
can be switched
Motor control Motor control Motor control
(standard) (standard) (standard)
(optional) (optional) (optional)
Connection variants interval, humidity, move-
ment for ER-AK, ER-AH, ER-AB
‒ Not for ER-A ‒