7
%DWWHU\,QVWDOODWLRQ5HSODFHPHQW$ONDOLQHRQO\
)
1. Set Inch/Metric Switch for inch
(
P
in
)
or metric (
P
m).
Set Traverse Length Switch for 1, 3 or 5. Refer to Traverse Length section
for details.
Set Parameter Switch to desired parameter -- R
a
, R
max
, or R
z
. If the Traverse
Length Switch is set to positions 1 or 3, the R
max
selection will actually calculate R
y
.
R
max
/R
y
and R
z
can be measured on the non-standard length 1 and 3, in addition to
the standard full length of 5. The display will "blink" the reading as a warning that it
is non-standard (not in accordance with ISO Standards).
Parameter Selection Switch
Inch/Metric Switch
Traverse Length Switch
“Start” Button
1. Remove Protective Cover 9 from Pocket Surf base and slide Battery Compartment
Cover 5 off end of Pocket Surf unit.
2. Install/replace battery and replace Battery Compartment Cover.
3. Press and release “Start” button to check battery condition (see next section).
Duracell #MN/1604 and Eveready
®
Energizer
®
#522 or other equivalent 9-volt alkaline batteries are suitable
UHSODFHPHQWV$YRLGQRQDONDOLQHRUUHFKDUJHDEOHEDWWHULHVEHFDXVHWKHVHW\SHVGRQRWKDYHVXI¿FLHQWSRZHU
3RFNHW6XUI&RQWUROVDQG'LJLWDO'LVSOD\
