19
&DUHIXOO\DGMXVWWKHSRVLWLRQRI
the Vee so that the probe skid
and stylus travel precisely along
the top (“crown” or “high spot”)
of the Setting Pin throughout the en-
tire traverse (measurement stroke).
Make several passes to ensure that
WKH9HHLVSURSHUO\DGMXVWHGDQG
that the probe skid and stylus do not
wander off the top of the Setting Pin
during the traverse.
4. Once the Vee is properly
DGMXVWHGUHPRYHWKH7RS3ODWH
(with the Pocket Surf unit on it) from
the Bottom Plate, and remove the
Setting Pin from the Vee. Securely
tighten the two screws in the bottom
of the Vee. Be very careful not to
disturb the position of the Vee in
performing this step.
9HH)L[WXUH$OLJQPHQW
(continued)
5. Place the Setting Pin back in the
Vee and place the Top Plate (with the
Pocket Surf unit) back on the Bottom
Plate, with the probe skid and stylus rest-
ing on the top of the Setting Pin. Make
two or three more traverses to ensure
that proper alignment of the Vee was
maintained after it was secured.
$OWHUQDWH9HH¶VRURWKHU¿[WXULQJ
fabricated by the user to accommodate
VSHFL¿FZRUNSLHFHVFDQEHVXEVWLWXWHG
for the normally furnished Vee.
