MAHLE VCT, Руководство пользователя и по обслуживанию

Страница: 16 / 89

VCT Ozone Generator
Use and maintenance manual
30
Led Status Reported Error Checks/solutions
Status Led Blinking Red
Error during procedure (sud-
den drop in Ozone level).
Make sure doors or windows
were not opened during the
test.
P1 On
P2 On
P3 Off
Status Led Blinking Red
Error during procedure.
(Ozone minimum threshold
level not reached).
Air the vehicle (room) and
wait the required time before
entering. Repeat the test. If
error persists, contact the
Technical Service.
P1 Off
P2 On
P3 On
Status Led Blinking Red
Low vehicle battery charge
level.
Start the engine or charge
the vehicle battery.
P1
Off
P2
Off
P3
Off
Status Led Blinking Red
Module, sensor or fan not
working.
Contact Technical Service.
P1 On
P2 On
P3 On
10. Disposal
10.1
Equipment disposal
At the end of its service life, the equipment must
be disposed of as follows:
n
Deliver the equipment to an authorised col-
lection centre according to local legislation.
10.2
Packaging disposal
Electronic and electrical equipment must never
be disposed of with domestic waste, but recy-
cled appropriately.
The packaging must be disposed of in conform-
ity with local legislation.
This contributes to protecting the environment.
11. Spare parts
Spare parts available to the user:
n
VCT cigarette lighter cable (12VDC power
supply from vehicle's battery).
Further spare parts are reserved for Service Cen-
tres authorised by MAHLE.
Using non-original /unapproved spare
parts or accessories can compromise
the safety of the equipment.