MAHLE VCT, Руководство пользователя и по обслуживанию

Страница: 13 / 89

VCT Ozone Generator
Use and maintenance manual
24 25
6. Technical features
Technical features
Interface Control panel 1 Button
4 LEDs
Automatic functions 1. Program P1
2. Program P2
3. Program P3
Performances Ozone production 5.000 mg/h
Dimensions WxDxH 360x205x255 mm
Loadless weight 3.8 kg
Power supply
(standard) Voltage 12 VDC
Power 80 W
Power supply
(optional) Voltage 110-230 VAC
Frequency 50-60 Hz
Power 80 W
Environmental
conditions Operating temperature 5-50°C
Humidity 10-80% R.H. (non-condensing)
Ambient pressure 75 kPa up to 106 kPa
O3 sensor Category: consumable 1,000 hours / 12 months
Other features International Protection Degree IP20
7. Use
7.1
Preliminary checks before
use
The equipment is not intended to be used in
n
In ATEX classified area (potential explosive
atmospheres).
Check that nobody is inside the vehicle/
room.
Make sure inside the vehicle/room there
aren’t products as:
n
Flammable or dangerous substances
n
Food and drinks
n
Medicines.
7.2
Equipment positioning
The equipment has to be positioned on a level
surface to ensure the correct operation.
Vehicle positioning
n
The vehicle has to be located outdoors or
in ventilated workshops.
Equipment positioning (use inside vehicle )
n
Inside the vehicle, preferably on the front
seat, with ozone output pointing at the
center of the vehicle.
n
In case of large volume vehicles, on one
of the central row seats with ozone output
pointing at the centre of the vehicle.
Equipment positioning (use inside rooms)
n
In the middle of the room, in an elevated
position.